| Applicable safety standard | Confirm which requirements apply to the finished window covering and its operating system in each destination market. ANSI/WCMA A100.1-2022 addresses safety of corded window covering products; EN 13120:2009+A1:2014 covers performance requirements, including safety, for internal blinds. | A written compliance statement identifying the standard edition, product model or configuration, market, and test basis. | Do not treat a general catalogue statement or a mechanism-only claim as proof that the complete blind complies. |
| Operating method | Identify whether the blind is cord-operated, chain-operated, spring-operated, motorized, or uses another control method. Safety obligations can depend on the product design and market rules. | Mechanism drawings, control-system description, and the proposed finished-product configuration. | Compare like-for-like configurations; do not assume a motorized option makes every other component compliant. |
| Safety test documentation | Check that testing covers the relevant blind assembly and safety features, rather than only a component unrelated to the finished installation. | A complete test report or other market-appropriate technical evidence, with model identification, test date, standard edition, and tested configuration. | Confirm that the report matches the product being quoted and is applicable to the intended market. |
| Cord and chain risk controls | For products with accessible cords or chains, verify the supplied design, safety devices, installation instructions, and warnings against the applicable requirements. | Photos or drawings of the complete control system, included safety devices, and product-specific installation and user instructions. | Check the delivered product and packaging; safety accessories should not be treated as optional if required for the specified configuration. |
| Product identification and traceability | Check that the supplier can consistently identify the mechanism version, compatible components, and finished-product configuration. | Model codes, revision history, technical data sheets, and lot or production traceability information. | Verify that approved test evidence and supplied goods refer to the same model and revision. |
| Installation and user information | Review whether instructions clearly cover mounting, operation, maintenance, and any safety-related installation steps for the supplied system. | Current instructions and warnings in the languages required for the target market. | Check that instructions correspond to the actual control type and accessories included in the order. |
| Change control | Ask how changes to the mechanism, control, components, or assembly are reviewed when compliance evidence exists for an earlier configuration. | Documented change-notification process and confirmation of whether a change affects existing test evidence. | Request updated documentation before accepting a materially changed product. |
| Market and edition verification | Confirm the applicable national or regional rules and accepted standard editions for the sales destination at the time of purchase. | Destination-specific compliance documentation and confirmation from the importer, conformity specialist, or relevant authority when needed. | Standards and legal requirements can differ by market and may change; verify current obligations rather than relying solely on this table. |