| Load weight and dimensions | Maximum load weight, load length and width, weight distribution, and how securely the load sits on the forks. | The truck must be rated for the load, and the forks must provide suitable support. Uneven or poorly positioned loads can affect stability. |
| Pallet type and fork fit | Pallet length, entry direction, fork opening, bottom-board design, and whether pallets are damaged or nonstandard. | Forks need to enter and support the pallet properly. Confirm dimensions rather than assuming all pallets are the same size. |
| Travel distance and operating mode | Typical trip length, number of moves per shift, and whether operators walk or need a rider platform. | A walk-behind model may suit short moves, while a rider configuration can be worth considering for frequent, longer horizontal travel. |
| Aisle width and turning space | Narrowest aisle, corners, doorways, staging areas, and room to approach and turn with a loaded truck. | Truck dimensions and turning requirements must fit the actual route, not just the straight aisle width. |
| Floor and route conditions | Floor smoothness, joints, slopes, ramps, thresholds, outdoor sections, and wet or slippery areas. | Surface and grade affect traction, handling, and safe operation. Check the truck’s limits and follow site safety procedures for ramps and slopes. |
| Duty cycle and battery needs | Moves per hour, operating hours per shift, charging opportunities, and battery-changing or charging arrangements. | Battery capacity and charging strategy should match the work schedule. Actual run time depends on load, route, temperature, and operating conditions. |
| Environment and cleaning | Dust, moisture, temperature, washdown frequency, and exposure to chemicals or corrosive materials. | Environmental conditions can affect components and service life. Select a configuration specifically approved for the site’s conditions. |
| Operator safety and training | Operator visibility, pedestrian traffic, emergency controls, training, and applicable workplace requirements. | Safe selection includes the truck’s controls and the work area. Operators should be trained and follow local regulations and site procedures. |
| Service and total operating cost | Maintenance support, replacement parts, battery service, expected utilization, and equipment availability. | Comparing ongoing service needs and downtime can help identify the most practical option for the operation. |