| Threaded-stud button magnet | A projecting threaded stud connects to a compatible recess former, insert, or fixture. | Positioning recessed formers and embedded components where a matching threaded connection is specified. | Provides a direct, compact connection and can be removed and reused when the assembly is designed for reuse. | Check thread size, engagement, alignment, and the intended concrete-side geometry. Do not assume that different thread standards are interchangeable. |
| Internal-thread button magnet | A threaded hole in the magnet accepts a matching bolt or threaded accessory. | Fixing accessories or formwork components that use a compatible screw connection. | Allows the fastener length or accessory to be selected for the assembly and can provide a low-profile connection. | Use the specified fastener and tightening method. Keep concrete, debris, and damaged threads from interfering with full engagement. |
| Through-hole or countersunk button magnet | A bolt passes through the magnet; a countersunk version can seat a compatible countersunk-head screw. | Mechanical attachment to a plate, bracket, or formwork accessory where through-fixing is required. | Offers a straightforward bolted interface and can help keep the fixing close to the mounting surface. | Match the hole and screw geometry. A countersunk screw should seat correctly; incorrect seating can affect contact and assembly fit. |
| Flat-face button magnet | The flat magnetic face sits against a suitable ferromagnetic formwork surface; a separate connection may attach the component. | Temporary positioning on steel formwork during setup of recessed or embedded features. | Simple to place, remove, and reposition when access is available and the mating surfaces are clean. | Holding performance depends on the contact surface, air gaps, coatings, alignment, and loading direction. Concrete residue or a rough surface can reduce contact. |
| Button magnet with a custom adapter | A purpose-designed adapter links the magnet to a specific recess former or embedded-part geometry. | Assemblies with non-standard shapes, clearances, or positioning requirements. | Can provide a tailored fit while keeping the magnetic base reusable across compatible setups. | Confirm adapter strength, fit, and cleanability as part of the full assembly. Validate the configuration before production use. |