| 1 | Material characteristics | Particle size, bulk density, moisture, abrasiveness, friability, and tendency to form dust or bridge. | Provide representative samples and material data. Ask whether conveying trials or testing are recommended. | Material properties influence conveying mode, line sizing, wear, throughput, and the risk of blockage or product damage. |
| 2 | Conveying mode and duty | Dilute-phase or dense-phase operation, batch or continuous duty, required capacity, and operating hours. | Confirm expected mass flow, conveying distance, elevation changes, start-up frequency, and any peak-load requirements. | The appropriate system depends on the material and process duty; a mode suited to one application may not suit another. |
| 3 | Route and line sizing | Pipe diameter, total route length, bends, vertical lifts, branch points, and future expansion allowances. | Request a layout drawing and design assumptions. Check that the proposed route reflects actual site measurements and fittings. | Route geometry and line dimensions affect pressure drop, capacity, wear, and the power needed to move material. |
| 4 | Air source and conditioning | Blower or compressor type, available pressure and flow, air quality, filtration, cooling, and moisture control. | Compare the system’s required air conditions with the site supply. Confirm whether the package includes filtration and pressure protection. | An unsuitable or poorly conditioned air supply can reduce reliability, affect product quality, and increase maintenance needs. |
| 5 | Key components and wear parts | Feeders, rotary valves or other airlocks, diverter valves, pipework, bends, filters, and receiver components. | Ask for component specifications, materials of construction, wear-part lists, and recommended inspection intervals. | Component suitability affects sealing, metering, product handling, service life, and the availability of replacement parts. |
| 6 | Filtration and dust control | Receiver filters, filter area, cleaning method, dust containment, and the handling of collected fines. | Check the filtration design against material dustiness and process requirements. Confirm safe access for filter inspection and replacement. | Effective filtration helps protect downstream equipment and limit dust release; filter loading can also affect system performance. |
| 7 | Controls and instrumentation | PLC or control-panel functions, pressure and differential-pressure monitoring, alarms, interlocks, and plant-network interfaces. | Define required signals, operating sequences, fault responses, local controls, and communication protocols before ordering. | Clear instrumentation and control requirements support safe operation, troubleshooting, and integration with the existing process. |
| 8 | Energy efficiency | Blower or compressor power, air leakage, pressure drop, filter condition, operating profile, and controls for variable demand. | Request estimated power demand at the stated duty and the assumptions behind it. Compare energy use at equivalent throughput and route conditions. | Total energy use depends on the complete system and operating conditions, not just the rated power of one component. |
| 9 | Safety and compliance | Pressure protection, guarding, electrical requirements, combustible-dust hazards, and applicable destination-market standards. | Identify the installation country, material hazards, and site rules. Request the relevant risk assessments and conformity documentation. | Safety and regulatory obligations depend on the installation, material, and jurisdiction and should be addressed during design. |
| 10 | Service, spares, and lifecycle cost | Commissioning, operator training, manuals, spare-parts availability, maintenance access, warranty terms, and support arrangements. | Compare total installed and operating costs, lead times for critical spares, service coverage, and the scope of commissioning support. | Purchase price alone does not reflect installation, energy, maintenance, downtime, and replacement-part costs over the system’s life. |