| Product and process fit | Compatibility with the MCB model range | Confirm supported frame sizes, pole configurations, terminal styles, accessories, and product changeover needs. | MCB designs can differ in dimensions and assembly sequence, so the robot and fixtures must suit the actual product family. |
| Robot reach and payload | Workspace, payload, and tool reach | Check the robot’s working envelope with the gripper, camera, screwdriver, and any cables installed—not just the bare robot. | Insufficient reach or payload can limit access to assembly stations and reduce positioning stability. |
| Positioning and repeatability | Ability to place small components consistently | Verify repeatability against the tightest part-placement and fastening tolerances in the process specification. | Consistent placement supports reliable assembly of small components such as springs, contacts, and internal mechanisms. |
| Part feeding | Flexible presentation of mixed or small parts | Assess bowl feeders, tray feeders, flexible feeders, escapements, and sensors for part orientation and low-level detection. | Stable part presentation reduces missed picks, jams, and incorrect orientations. |
| End-of-arm tooling | Grippers suited to component geometry | Review jaw or vacuum options, gripping force adjustment, part-presence sensing, and quick-change arrangements. | Different MCB components may be delicate, small, or difficult to grip with a single tool design. |
| Screw fastening | Controlled screwdriving with process feedback | Look for torque and angle monitoring, screw-present detection, fastening result storage, and error handling. | Monitoring helps identify cross-threading, missing screws, and fastening results outside the defined process limits. |
| Machine vision | Part identification and orientation checks | Check lighting, camera placement, inspection coverage, and performance with actual parts, surface finishes, and production speeds. | Vision can confirm part orientation and presence before assembly or detect visible defects at inspection points. |
| Electrical testing interface | Integration with end-of-line test equipment | Define how the robot transfers products to test stations and receives pass/fail results, including reject handling. | Coordinated testing prevents untested or failed products from being mixed with accepted output. |
| Traceability | Recording of product and process results | Specify required identifiers and records, such as product code, test result, fastening data, timestamp, and station status. | Traceable records support quality investigations and production monitoring when required by the manufacturer’s quality system. |
| Changeover | Recipe control and tooling change time | Evaluate guided changeovers, stored robot programs, fixture identification, and safeguards against selecting the wrong recipe. | Well-managed changeovers reduce setup errors when switching between MCB variants. |
| Controls and integration | Communication with line equipment | Confirm interface requirements for PLCs, safety circuits, feeders, test systems, and production data collection. | Clear communication supports coordinated operation, fault reporting, and line-level monitoring. |
| Safety | Risk assessment and protective measures | Review guarding, interlocked access, emergency stops, safe operating modes, and the required risk assessment for the complete cell. | Robot safety depends on the integrated workcell, tooling, operating modes, and access arrangements—not the robot alone. |
| Maintainability | Access to wear parts and fault diagnostics | Check access to grippers, feeder tracks, screwdriver bits, sensors, and maintenance instructions; review available fault logs. | Accessible tooling and clear diagnostics can simplify routine servicing and fault recovery. |
| Acceptance testing | Validation using production-representative parts | Agree on sample parts, operating conditions, changeover scenarios, quality checks, and acceptance criteria before final approval. | Testing the complete process helps confirm that the robot, tooling, feeders, and inspection steps work together as intended. |