| 1. Application and duty | Motor type, rated output, duty cycle, load profile, starting method, and operating environment. | A project-specific datasheet and written confirmation that the proposed motor suits the application. | A motor selected only by power rating may not suit the actual load or operating conditions. |
| 2. Efficiency and losses | Declared efficiency class and efficiency at the specified rating, frequency, and pole count. IEC 60034-30-1 defines IE efficiency classes for covered line-operated motors. | Efficiency test report, nameplate data, and the applicable test method and standard edition. | Efficiency affects energy consumption over the motor’s operating life; compare like-for-like ratings and test conditions. |
| 3. Electrical design | Rated voltage, frequency, phase, current, power factor, connection, and allowable supply variation. | Electrical datasheet, winding diagram, and confirmation of compatibility with the project supply or drive. | Matching the motor to the available supply helps avoid electrical, starting, and integration issues. |
| 4. Variable-speed operation | Permitted speed range, cooling at low speed, insulation suitability, and any required bearing-current protection when used with a drive. | Drive-operation instructions, speed/torque curves, and confirmation of any required options. | A motor designed for fixed-speed operation may need additional provisions for inverter duty. |
| 5. Enclosure and protection | Enclosure type and IP rating for the installation environment. IEC 60034-5 specifies degrees of protection provided by integral design of rotating electrical machines. | Declared IP rating, construction drawings, and any test or inspection documentation relevant to the specification. | The required protection depends on exposure to dust, water, and other site conditions. |
| 6. Thermal and insulation design | Insulation thermal class, temperature-rise limits, ambient-temperature assumptions, and cooling method. IEC 60085 designates thermal classes including 155 (F) and 180 (H). | Insulation-class declaration, temperature-rise test data, and stated ambient and altitude limits. | Thermal suitability influences reliability under the project’s actual load and environmental conditions. |
| 7. Mechanical fit and interfaces | Frame and mounting dimensions, shaft size, flange, terminal-box position, rotation, and coupling requirements. | Dimensioned outline drawing, shaft drawing, and interface confirmation against the driven equipment. | Early verification reduces the risk of installation delays and costly interface changes. |
| 8. Testing and quality control | Routine tests, agreed optional tests, inspection points, traceability, and acceptance criteria. | Sample test report, inspection and test plan, calibration information, and a clearly defined acceptance procedure. | Documented testing makes it easier to verify that delivered equipment matches the approved specification. |
| 9. Delivery and project support | Quoted manufacturing lead time, drawing approval schedule, packaging, shipping terms, and technical support responsibilities. | Project schedule, delivery terms, document list, escalation contacts, and support scope in writing. | Clear commitments help coordinate procurement, installation, and commissioning. |
| 10. Commercial terms and lifecycle cost | Quoted scope, exclusions, payment terms, warranty conditions, spare-parts availability, and energy-cost assumptions. | Itemized quotation, warranty text, recommended spares list, and lifecycle-cost assumptions using the project’s operating profile. | Purchase price alone may not reflect operating, maintenance, and replacement costs. |