| 316L stainless steel | Approximately 0.5–100 μm for many sintered products | Good general corrosion resistance in many industrial environments. Chlorides and some acids can cause pitting or other corrosion. Temperature capability depends on atmosphere, load, seals, and construction. | Process liquids, gases, chemical processing, food and beverage equipment, and reusable filter assemblies. | Widely used; cleanable and available in a broad range of constructions. | Check compatibility with the actual fluid, chloride concentration, cleaning chemicals, and operating temperature. |
| 304 stainless steel | Product-dependent; commonly offered in several sintered or mesh grades | Suitable for many general-purpose applications, but typically less resistant than 316L to chloride-containing environments. | Water and air filtration, general equipment protection, and applications with mild process conditions. | Common, readily fabricated, and often appropriate for non-aggressive service. | Consider 316L or another alloy when exposure to chlorides, acids, or frequent washdown is expected. |
| Duplex stainless steel | Depends on the sintered or perforated construction | Often selected for improved strength and resistance to chloride stress-corrosion cracking compared with common austenitic grades; performance remains environment-specific. | Marine systems, offshore processing, and chloride-bearing process streams. | Higher strength can support demanding mechanical designs. | Confirm the exact alloy, fabrication method, weld condition, and corrosion data for the service environment. |
| Nickel-chromium-molybdenum alloy | Depends on alloy and manufacturing process; confirm available ratings | Can provide strong resistance to a range of aggressive acids and chloride environments, depending on the specific alloy and process conditions. | Corrosive chemical processing and applications where stainless steel is not sufficiently resistant. | Useful where corrosion resistance is a primary design requirement. | Higher material cost; verify compatibility using the precise chemical composition, concentration, temperature, and exposure time. |
| Titanium | Supplier- and construction-dependent; fine sintered grades are available | Strong resistance in many oxidizing chloride environments, including seawater service. Not suitable for every acid or reducing environment. | Seawater, brine, marine equipment, and selected chemical processes. | High corrosion resistance in appropriate environments and relatively low density. | Check compatibility with reducing acids, crevices, deposits, and the specific cleaning regime. |
| Sintered bronze | Often available in coarse-to-medium ratings; exact range varies by product | Suitable for many lubricating-oil, air, and general fluid applications, but not for all corrosive chemicals or high-temperature services. | Pneumatic equipment, lubrication systems, and general-purpose fluid filtration. | Can provide economical, porous media for compatible fluids. | Check fluid compatibility and avoid assuming it is suitable for potable water, aggressive chemicals, or elevated temperatures. |
| Nickel-based porous metal | Construction- and supplier-dependent | Can be considered for selected high-temperature or chemically demanding services; limits vary substantially by alloy and operating atmosphere. | Specialty process gases, high-temperature systems, and selected chemical applications. | Offers options beyond common stainless steel for specialized conditions. | Specify the alloy and verify oxidation, corrosion, and temperature limits for the full operating cycle. |