| EPS-core panel | Metal sheet facings bonded to an expanded polystyrene (EPS) core. | Lightweight and commonly selected for cost-conscious projects. EPS is combustible, so fire performance must be assessed for the full assembly. | Enclosures and support areas where project requirements permit this core. | Confirm fire-test evidence, joint details, facing material, and compatibility with cleaning agents. |
| Mineral-wool-core panel | Metal facings with a stone-wool or other mineral-wool insulation core. | Mineral-wool products are generally non-combustible; the panel’s fire rating still depends on its complete tested construction. | Projects that place emphasis on fire performance, subject to local code and assembly test results. | Request applicable fire-test reports, density and thickness data, and details for sealed edges and joints. |
| Glass-wool-core panel | Metal facings enclosing a glass-wool insulation core. | Provides thermal and acoustic insulation. Performance varies with core specification, panel thickness, and workmanship. | Partitions where insulation and sound control are relevant and the specified assembly meets project requirements. | Check fire classification, core containment, dimensional tolerances, and the finish’s cleanability. |
| PU/PIR-core panel | Metal facings bonded to a rigid polyurethane (PU) or polyisocyanurate (PIR) foam core. | Rigid foam cores can provide effective thermal insulation at relatively low weight. Fire behavior differs by formulation and assembly. | Temperature-controlled rooms and partitions where insulation performance is an important design factor. | Compare declared thermal data, fire-test documentation, facing adhesion, and temperature limits. |
| Paper-honeycomb-core panel | Metal facings bonded to a paper honeycomb structure. | Lightweight cellular construction can offer useful stiffness for its mass. Paper cores require protection from moisture and are combustible. | Dry interior partitions where lightweight construction is suitable and fire requirements are satisfied. | Verify edge sealing, moisture exposure limits, load requirements, and the applicable fire classification. |
| Aluminum-honeycomb-core panel | Metal facings bonded to an aluminum honeycomb core. | A lightweight cellular panel that can provide high stiffness when properly designed. It is not, by itself, a guarantee of a particular fire rating. | Applications requiring a lightweight, rigid partition or panel system. | Review bonding method, point-load limits, corrosion compatibility, and tested fire performance. |
| Magnesium-oxide-board panel | Metal facings combined with magnesium oxide (MgO) board layers or a board-based core. | Offers a rigid board-based construction. Moisture behavior and product composition vary; board designation alone does not establish panel fire performance. | Projects requiring a board-faced partition, where the selected product is suitable for the site environment. | Request product-specific composition, moisture and corrosion data, and test reports for the complete panel assembly. |